{ "currentVersion": 10.91, "cimVersion": "2.9.0", "serviceDescription": "

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://www.coast.noaa.gov/slr These data depict the potential inundation extent of coastal areas resulting from National Weather Service issued Coastal Flood Advisories. The Coastal Flood Advisory areas are based on individual Weather Forecast Office (WFO) guidance thresholds at monitored tide stations and are referenced to the MLLW tidal datum. The process used to produce the data can be described as a modified bathtub approach that attempts to account for both local/regional tidal variability. The process uses either two or three source datasets depending on geographic location to derive the final inundation rasters: the Digital Elevation Model (DEM) of the area, a tidal surface model that represents spatial tidal variability, and an interpolated threshold surface if there is significant difference between flooding thresholds between varying geographic areas (Ex: Chesapeake Bay area). The tidal model is created using the NOAA National Geodetic Survey's VDATUM datum transformation software (http://vdatum.noaa.gov) in conjunction with spatial interpolation/extrapolation methods and represents the MLLW tidal datum in orthometric values (North American Vertical Datum of 1988).The interpolated threshold surface is created using the flooding threshold values found at select NOAA tide gages used by the NWS to define flooding events. The methods used to produce these data does not account for erosion, subsidence, or any future changes in an area's hydrodynamics. It is simply a method to derive data in order to visualize the potential scale and extent, not exact location, of inundation from NWS issued Coastal Flood Advisories. Disclaimer: This product is for informational purposes only and may not be suitable for legal, engineering, or surveying purposes. It does not represent an official survey and represents only the approximate relative location of features and boundaries. Mapping may not necessarily reflect on-the-ground conditions. This product and those involved in its production make no claims as to the accuracy or reliability of the data, and neither assumes, nor will accept liability for their use.<\/span><\/p><\/div><\/div><\/div>", "mapName": "NOAA_OCM_Flood_Frequency", "description": "", "copyrightText": "NOAA Office for Coastal Management", "supportsDynamicLayers": true, "layers": [ { "id": 0, "name": "NOAA_OCM_Flood_Frequency", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Raster Layer", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": -1.0967368891477868E7, "ymin": 2991010.071799695, "xmax": -1.036758092201082E7, "ymax": 3521132.4032202377, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": -1.0920436671140468E7, "ymin": 2965770.1743982653, "xmax": -1.0403551858781083E7, "ymax": 3548226.0751782726, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 0, "maxScale": 0, "units": "esriMeters", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "NOAA_OCM_Flood_Frequency", "Author": "", "Comments": "

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://www.coast.noaa.gov/slr These data depict the potential inundation extent of coastal areas resulting from National Weather Service issued Coastal Flood Advisories. The Coastal Flood Advisory areas are based on individual Weather Forecast Office (WFO) guidance thresholds at monitored tide stations and are referenced to the MLLW tidal datum. The process used to produce the data can be described as a modified bathtub approach that attempts to account for both local/regional tidal variability. The process uses either two or three source datasets depending on geographic location to derive the final inundation rasters: the Digital Elevation Model (DEM) of the area, a tidal surface model that represents spatial tidal variability, and an interpolated threshold surface if there is significant difference between flooding thresholds between varying geographic areas (Ex: Chesapeake Bay area). The tidal model is created using the NOAA National Geodetic Survey's VDATUM datum transformation software (http://vdatum.noaa.gov) in conjunction with spatial interpolation/extrapolation methods and represents the MLLW tidal datum in orthometric values (North American Vertical Datum of 1988).The interpolated threshold surface is created using the flooding threshold values found at select NOAA tide gages used by the NWS to define flooding events. The methods used to produce these data does not account for erosion, subsidence, or any future changes in an area's hydrodynamics. It is simply a method to derive data in order to visualize the potential scale and extent, not exact location, of inundation from NWS issued Coastal Flood Advisories. Disclaimer: This product is for informational purposes only and may not be suitable for legal, engineering, or surveying purposes. It does not represent an official survey and represents only the approximate relative location of features and boundaries. Mapping may not necessarily reflect on-the-ground conditions. This product and those involved in its production make no claims as to the accuracy or reliability of the data, and neither assumes, nor will accept liability for their use.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "Subject": "The purpose of these data is to show the potential inundation extent caused by NWS issued Coastal Flood Advisories.", "Category": "", "AntialiasingMode": "None", "TextAntialiasingMode": "Force", "Version": "2.4.0", "Keywords": "environment,Bathymetry/Topography,elevation,climatology,Meteorology,Atmosphere,sea level rise,oceans,flooding,Shoreline,inundation,United States" }, "capabilities": "Map,Query,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "datumTransformations": [ { "geoTransforms": [ { "wkid": 108190, "latestWkid": 108190, "transformForward": false, "name": "WGS_1984_(ITRF00)_To_NAD_1983" } ] }, { "geoTransforms": [ { "wkid": 108190, "latestWkid": 108190, "transformForward": true, "name": "WGS_1984_(ITRF00)_To_NAD_1983" } ] } ], "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "WMSServer" }